ABOUT THIS ITEM
Exterior Container MAY have damage but the item is in new condition. Has been opened for inspection.
This solar controller adopts the advanced digital techniques and operates fully automatically. The PWM battery charging mode can greatly increase the lifetime of your battery and has various unique functions and quite easy to use features.
LCD screen display all parameters.
With output switch, intelligent control, easy to operate.
Fully automatic operation.
Microcontroller digital accuracy.
A key to open and close the load.
PWM charging mode(SOC).
With separated temperature detected circuit, high temperature compensation function.
DC and USB 5V charging for DC lamp and phone.
Reverse polarity protection.
Voltage of Battery: / 24V Automatic
Rated /Discharge Current: 20A
USB Output Voltage: 5V
Total USB Output Current: 3A
DC Output Voltage:
Total DC Output Current: 2A
Overload/Short Circuit Protection: 1.5 Times by Rated Current
Short Circuit Recovery Time: 10s
Open Circuit Voltage of Solar Panel: 40V
No Load Loss: 0.05W
Over Voltage Protection: 15V; x2/24V
Float Voltage: 14V; x2/24V
Discharge Recovery Voltage: ; x2/24V
Over Discharge Voltage: 10.5V; x2/24V
Control Mode: Software Intelligent Control
Working Temperature: -35~55°C
Item Size: 135 * 100 * 25mm / 5.31 * 3.94 * 0.98in (L * W * H)
Item Weight: 222g / 7.83oz
Package Size: 14.5 * 12 * 3.8cm / 5.7 * 4.72 * 1.5in (L * W * H)
Package Weight: 270g / 9.54oz
1. Order of Connection: connect storage battery firstly, then connect the solar panel; Order of Disconnection: disconnect the solar panel firstly, then the storage battery; otherwise it will cause damage to the controller.
2. The inverter can't be connected to the controller directly.
3. The controller will generate heat during operation, please notice that put the controller on flat surface with good ventilation.
For System, battery voltage is , recommended input voltage of solar panel: 16-22V, when actual input voltage>50V, controller will be damaged;
For 24V System, battery voltage is 24V, recommended input voltage of solar panel: 32-44V, when actual input voltage>50V, controller will be damaged.
1 * Solar Controller
2 * DC Cable
1 * User Manual(English)
- LCD screen display all parameters.
- With output switch, intelligent control, easy to operate.
- Fully automatic operation.
- Microcontroller digital accuracy.
- A key to open and close the load.