Select Page

Sandblaster® Immersion Mount Thermostats Commercial Electric Water Heaters CSB 82 9 IFE

$3,359.00

Sandblaster® Immersion Mount Thermostats Commercial Electric Water Heaters CSB 82 9 IFE

FREE SHIPPING

1 in stock

SKU: CSB 82 9 IFE Category: Tag:

Description

Sandblaster® Immersion Mount Thermostats Commercial Electric Water Heaters CSB 82 9 IFE

FREE SHIPPING

Features
Meets the standby loss requirements of the U.S. Department of Energy and current edition ASHRAE/IESNA 90.1.

Advanced Electronic Control – Plain English text and animated icons display detailed operational and diagnostic information. Fault or Alert messages appear if an operational issue occurs. Immersion temperature control adjustable through a range of 90 ºF to 190 ºF.

  • iCOMM™ compatible and can be monitored from remote locations.

Economy Mode Operation – Control system automatically lowers the Operating Set Point by a programmed value during user-defined time periods. Helps reduce operating costs during unoccupied or off – peak demand periods.

Linear Sequencing – Banks of heating elements (3 elements per bank) are energized according to adjustable (1 to 20º) differential set points for each bank. First bank on is the last bank off. Helps reduce current surge and provides accurate water temperature control.

Gold Elements – CSB models ship with the gold plated elements (see element availability chart on back). Patented elements provide long life and superior scaling resistance. Low watt density means lower surface temperature to minimize scale buildup and more surface to heat water. Gold elements carry a one-year warranty against failure due to lime scale buildup.

Glasslined Tank – Three sizes: 50, 80, and 119-gallon capacity. Tank interior is coated with glass specially developed for water heater use. Tanks rated at 150 psi (1034 kPa) working pressure (ASME 150 psi). Foam insulation reduces costly heat loss, and is vermin proof.

Fusing – Protects all elements, thermostats, and internal wiring circuits against excess current flow. Meets National Electrical Code requirements that non-ASME tanks must have internal fusing when current draw exceeds 48 amps.

Standard Voltages – 208, 240, and 480 V single-phase and three-phase delta. Convertible from three-phase to single-phase (in field) and vice versa. 277 V single-phase also available.

Terminal Block – Factory installed. Just bring the service to the heater and connect to block.

Magnetic Contactors – Heavy duty, UL rated 100,000 cycles.