DESCRIPTION

The 9-pos. version of the SUBCON-... connector range is not just suitable for INTERBUS, but is positively ideal. A whole host of further applications are opened up by having all the connections assigned to their own 1 mm² screw terminal block. The range covers SUBCON plugs for point-to-point connections with a cable infeed in 9, 15 and 25-pos. male or female versions. The optional fastening screw SUBCON-SHORT-SCREW is available as an accessory for narrow installation conditions. The screw is completely integrated into the housing by not having a knurl.

---

Technical Data

---

Notes

Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

---

Product properties

Product type	Data plug
MTTF	6706 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
	1817 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
	155 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Pin assignment	All connections are 1:1 on the screw terminal block

---

Electrical properties

Nominal voltage UN	50 V DC
Nominal current IN	100 mA
Transmission medium	Copper

---

Connection data

D-SUB connection
Connection method	D-SUB socket
D-SUB connection
Connection method	Screw connection
Stripping length	5 mm
Conductor cross section solid min.	0.14 mm²
Conductor cross section solid max.	1.5 mm²
Conductor cross section flexible min.	0.14 mm²
Conductor cross section flexible max.	1 mm²
Conductor cross section AWG min.	26
Conductor cross section AWG max.	16

---

Interfaces

Signal	RS-232
	RS-422
	RS-485

---

Dimensions

Dimensional drawing
Width	16 mm
Height	55 mm
Length	56.5 mm
External dimensions
External diameter min.	4 mm
External diameter max.	10 mm

---

Material specifications

Housing material

ABS, metal-plated

---

Connector

Insertion/withdrawal cycles

> 200

---

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-20 °C ... 75 °C
Ambient temperature (storage/transport)	-25 °C ... 80 °C
Altitude	≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)

---

Approval data

EAC
Identification	EAC
EAC
Identification	 II 3 G Ex nA IIC T4 Gc X
Note	Please follow the special installation instructions in the documentation!
EAC
Identification	ISA-S71.04-1985 G3 Harsh Group A

---

Standards and regulations

Free from substances that could impair the application of coating

according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard

Shipping is automatically calculated at checkout.

In store pickup is sometimes the only option. These products are noted as such in our listings.

Some items have been set up so that they require a shipping quote.  Please fill out the appropriate form on the product's page and we will respond within 24-48 hours with a freight quote.  

What we ship is by best carrier, some products prepaid and others not, due to our large variances in product lines, physical sizes and weight.

At checkout you will be prompted for shipping alternatives dependent on these parameters. Products which fit standardized packaging may also have calculated shipping costs by weight and volume on our website.

In all cases our staff audits for the best shipping cost and if necessary will contact our customer with recommendations.

Freight/Palleted items that are not accepted by the recipient or are sent back to us due to undeliverable address may be refunded, but the return shipping fees will be deducted from the overall amount of refund.

All returned items are subject to a 10% handling fee.

This product was acquired by Freeman Liquidators from a sale of merchandise subject to a commercial insurance loss. Freeman Liquidators is a secondary seller of products, is not affiliated with or sponsored by the manufacturer of the products and is not a manufacturer authorized seller of the products. Sale of this product by Freeman Liquidators is not subject to the policies of the manufacturer. Any warranty offered by the manufacturer is not available to you as the purchaser. All products are NEVER USED but external packaging will have damage. Some items may be placed into other packaging to ensure safe shipping. All items are opened for inspection prior to shipment to ensure the best quality of products. Freeman Liquidators guarantees your satisfaction. If you are not completely satisfied with a purchased product, within 30 days from the date of purchase, return the product in its packaging and Freeman Liquidators will fully refund your money.