New Arrivals

Power Washing Systems & Replacement Parts are Rolling in!

LOT OF 2 - WAGO, 788-507 Relay module - NEW NO BOX

$29.99 $39.99
Shipping calculated at checkout.

Description

LOT OF 2 - WAGO,  788-507 Relay module - NEW NO BOX

Relay module; Nominal input voltage: 115 VAC; 1 changeover contact; Limiting continuous current: 16 A; Red status indicator; Module width: 15 mm; 2,50 mm²; gray

  • Notes

      • Safety information 1 A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
        Note
        • Reinforced insulation between coil and contacts
        • To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
        Technical data

        Control Circuit
        Nominal input voltage UN AC 115 V
        Input voltage range ±10 %
        Nominal input current at UN 8 mA
        Load circuit
        Number of changeover contacts 1
        Contact material (relay) AgNi 90/10
        Limiting continuous current 16 A
        Inrush current (resistive) max. (AC) 30 A / 4 s
        Switching voltage (max.) AC 250 V
        Switching power (resistive) max. AC 4000 VA; DC (see load limit curve)
        Switching capacity AC-15: 6 A / AC 250 V; DC-13: 2 A / DC 24 V
        Recommended minimum load 12 V / 10 mA
        Pull-in time (typ.) 10ms
        Drop-out time (typ.) 35ms
        Bounce time (typ.) 6ms
        Electrical life (NO; resistive load; 23 °C) 30 x 10³ switching operations
        Mechanical life 5 x 10⁶ switching operations
        Switching frequency with/without load (max.) 6 min-1 / 600 min-1
        Signaling
        Status indicator Red LED
        Safety and protection
        Rated voltage 250V
        Rated surge voltage 4kV
        Pollution degree 3
        Dielectric strength (control/load circuit) (AC, 1 min) 5 kVrms
        Dielectric strength (open contact) (AC, 1 min) 1 kVrms
        Safety information 1 A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
        Protection type IP20
        Connection data
        Connection technology Push-in CAGE CLAMP®
        Solid conductor 0.34 … 2.5 mm² / 22 … 14 AWG
        Fine-stranded conductor 0.34 … 2.5 mm² / 22 … 14 AWG
        Strip length 9 … 10 mm / 0.35 … 0.39 inches
        Physical data
        Width 15 mm / 0.591 inches
        Height 86 mm / 3.386 inches
        Depth from upper-edge of DIN-rail 54 mm / 2.126 inches
        Mechanical Data
        Mounting type DIN-35 rail
        Material Data
        Color gray
        Fire load 0.67MJ
        Weight 44.9g
        Environmental requirements
        Ambient temperature (operation at UN) -40 … 70 °C
        Ambient temperature UL (operation at UN) -40 … 40 °C
        Surrounding air temperature (storage) -40 … +70 °C
        Processing temperature -25 … +50 °C
        Standards and specifications
        Standards/specifications EN 61010-2-201
        EN 61810-1
        EN 61373
        UL 508 (max. 40 °C)
        DNV
        Basic relay
        WAGO Basic Relay 788-174
        Commercial data
        Product Group 6 (Interface Electronics)
        eCl@ss 10.0 27-37-16-01
        eCl@ss 9.0 27-37-16-01
        ETIM 8.0 EC001437
        ETIM 7.0 EC001437
        PU (SPU) 20 (1) pcs
        Packaging type box
        Country of origin DE
        GTIN 4045454389505
        Customs tariff number 8536490075

Delivery and Shipping

Shipping is automatically calculated at checkout.

In store pickup is sometimes the only option. These products are noted as such in our listings.

Some items have been set up so that they require a shipping quote.  Please fill out the appropriate form on the product's page and we will respond within 24-48 hours with a freight quote.  

What we ship is by best carrier, some products prepaid and others not, due to our large variances in product lines, physical sizes and weight.

At checkout you will be prompted for shipping alternatives dependent on these parameters. Products which fit standardized packaging may also have calculated shipping costs by weight and volume on our website.

In all cases our staff audits for the best shipping cost and if necessary will contact our customer with recommendations.

Freight/Palleted items that are not accepted by the recipient or are sent back to us due to undeliverable address may be refunded, but the return shipping fees will be deducted from the overall amount of refund.

All returned items are subject to a 10% handling fee.

Product Disclosure

This product was acquired by Freeman Liquidators from a sale of merchandise subject to a commercial insurance loss. Freeman Liquidators is a secondary seller of products, is not affiliated with or sponsored by the manufacturer of the products and is not a manufacturer authorized seller of the products. Sale of this product by Freeman Liquidators is not subject to the policies of the manufacturer. Any warranty offered by the manufacturer is not available to you as the purchaser. All products are NEVER USED but external packaging will have damage. Some items may be placed into other packaging to ensure safe shipping. All items are opened for inspection prior to shipment to ensure the best quality of products. Freeman Liquidators guarantees your satisfaction. If you are not completely satisfied with a purchased product, within 30 days from the date of purchase, return the product in its packaging and Freeman Liquidators will fully refund your money.

LOT OF 2 - WAGO, 788-507 Relay module - NEW NO BOX

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.