Freeman Liquidators Always New, Always Guaranteed, Always Discounted!

Reznor, WS140/175, Horizontal/Vertical, Suspended, Hydronic, Unit Heater - FreemanLiquidators - [product_description]
Reznor, WS140/175, Horizontal/Vertical, Suspended, Hydronic, Unit Heater - FreemanLiquidators - [product_description]
Reznor, WS140/175, Horizontal/Vertical, Suspended, Hydronic, Unit Heater - FreemanLiquidators - [product_description]
Reznor, WS140/175, Horizontal/Vertical, Suspended, Hydronic, Unit Heater - FreemanLiquidators - [product_description]
Reznor, WS140/175, Horizontal/Vertical, Suspended, Hydronic, Unit Heater - FreemanLiquidators - [product_description]
  • Load image into Gallery viewer, Reznor, WS140/175, Horizontal/Vertical, Suspended, Hydronic, Unit Heater - FreemanLiquidators - [product_description]
  • Load image into Gallery viewer, Reznor, WS140/175, Horizontal/Vertical, Suspended, Hydronic, Unit Heater - FreemanLiquidators - [product_description]
  • Load image into Gallery viewer, Reznor, WS140/175, Horizontal/Vertical, Suspended, Hydronic, Unit Heater - FreemanLiquidators - [product_description]
  • Load image into Gallery viewer, Reznor, WS140/175, Horizontal/Vertical, Suspended, Hydronic, Unit Heater - FreemanLiquidators - [product_description]
  • Load image into Gallery viewer, Reznor, WS140/175, Horizontal/Vertical, Suspended, Hydronic, Unit Heater - FreemanLiquidators - [product_description]

Reznor, WS140/175, Horizontal/Vertical, Suspended, Hydronic, Unit Heater

Regular price
$1,499.99
Sale price
$1,499.99
Regular price
$2,049.99
Sold out
Unit price
per 
Shipping calculated at checkout if applicable

Available Quantity: 2

Reznor WS140/175 Horizontal/Vertical Suspended Hydronic Unit Heater,

  • Product Overview


    Reznor's WS series utilizes an advanced hot water pressure system to provide efficient and uniform heating for commercial and industrial environments.
     
    The motor in this unit is hermetically sealed and has two speeds. It requires no maintenance, and can be wired for a supply voltage of 115/1/60. The speed can also be adjusted to run at either high or low RPMs. This feature allows for increased BTUH output (at high speed) or quieter operation (at low speed) as desired.
     
    The heat exchanger contains a single row of steel coils with aluminum fins, each with a density of approximately 10-½ fins per inch (4 fins per cm). The spacing between fins allows for easy maintenance, which is important for maintaining the unit's efficiency. Additionally, the heat exchanger is coated with a special paint to enhance durability and thermal efficiency over time. Prior to shipping, all heat exchangers undergo a pressure test of over 350 psi (25 bar) at the factory. This unit's durable steel tubing makes it suitable for use with high hot water pressures of up to 150 psi.
     
    This unit boasts a fan/motor assembly consisting of three components: the fan, motor, and fan guard. The fan guard is made of galvanized steel, providing protection against corrosion and acting as the main support for the fan. It is attached to the main casing using anti-vibration rubber mounts. The WS series heaters can be installed for both vertical and horizontal discharge.

    • Low Speed/High Speed BTUH: 140,000/175,000
    • Low Speed/High Speed Air Volumes (CFM): 1750/2300
    • All motors have internal protection as a standard feature
    • Cabinet and louvers constructed of galvanized pre-painted steel
    • Cabinet held together by shake-proof screws and molded corner sections
    • Spring mounted horizontal louvers
    • Units are manufactured in an ISO 9001 registered facility
     

    Tech Specs

    General Features

    Installation Type:  Ceiling Mount
    Fuel Type:  Hot Water
    Water Content: 1.563 Gal. (6 Liters)
    Certified Usage:  Commercial (Indoor Only)


    Performance

    BTUs (Low / High):  140000 / 175000
    Watts (Low / High):  41034 / 51293
    Kw (Low / High):  35282 / 44103


    System Data

    Noise Level (dBA) @ 16.5 ft. (Low / High): 49 / 55
    Blower/Fan Size (in.): 21
    CFMs (Low / High): 1750 / 2300
    Rows of Coils: 2
    Max. Leaving Temp (Low / High): 134°F / 130°F
    Approx. Fan RPMs (Low / High): 850 / 1080
    Supply Air Velocity FPM (Low / High): 590 / 773
    Motor Horsepower (Low / High): .070 / .160


    Weights and Dimensions

    Width (in.): 27.0625
    Length (in.): 19.1875
    Height (in.): 27.0625
    Net Weight (lbs.): 88


    Electrical Requirements

    Voltage: 110-120V
    Amps (Low / High):  1.1 / 2.6
    Certifications: UL Listed

PRODUCT DISCLOSURE

This product was acquired by Freeman Liquidators from a sale of merchandise subject to a commercial insurance loss. Freeman Liquidators is a secondary seller of products, is not affiliated with or sponsored by the manufacturer of the products and is not a manufacturer authorized seller of the products. Sale of this product by Freeman Liquidators is not subject to the policies of the manufacturer. Any warranty offered by the manufacturer is not available to you as the purchaser.  All products are NEVER USED but external packaging will have damage.  Some items may be placed into other packaging to ensure safe shipping.  All items are opened for inspection prior to shipment to ensure the best quality of products.  Freeman Liquidators guarantees your satisfaction. If you are not completely satisfied with a purchased product, within 30 days from the date of purchase, return the product in its packaging and Freeman Liquidators will fully refund your money.

EXTERNAL PACKAGING HAS BEEN EXPOSED TO MINOR WATER DAMAGES